Product Specification |
Overview | Ruijie RG-RAP72-Wall Ruijie BE3600 Dual-Band Wall-Mount Wi-Fi 7 Access Point แบบ Wall-Plate ความเร็วสูงสุด 3.6Gbps, 4 Port Lan 2.5Gb, POE Passthrough รองรับ POE มาตรฐาน 802.3at
รองรับการทำ Authenticate แบบ Captive Portal
Manage และ Monitor ผ่าน Cloud, Standalone และ Hardware Control
พร้อม Ruijie Cloud License แบบ Lifetime |
Wi-Fi Radio |
Radio design | Dual-radio 4 spatial streams
2.4 GHz: 2 x 2, MU-MIMO
5 GHz: 2 x 2, MU-MIMO |
Operating frequencies | Radio 1, 802.11b/g/n/ax:
2.400 GHz to 2.4835 GHz (HE20/HE40), ISM, channels 1 to 13 Radio 2, 802.11a/n/ac/ax:
5.150 GHz to 5.250 GHz, U-NII-1, channels 36, 40, 44, and 48
5.250 GHz to 5.350 GHz, U-NII-2A, channels 52, 56, 60, and 64
5.470 GHz to 5.725 GHz, U-NII-2C, channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, and 140
5.725 GHz to 5.850 GHz (HE80), U-NII-3/ISM, channels 149, 153, 157, 161, and 165
Note: Country-specific restrictions apply. |
Data rates | IEEE 802.11b/g/n/ax/be, 2.400 GHz to 2.4835 GHz IEEE 802.11a/n/ac/ax/be, 5.150 GHz to 5.350 GHz, 5.470 GHz to 5.725 GHz, 5.725 GHz to 5.850 GHz Note: Available bands vary with countries and regions. To use the preceding frequency bands, ensure that your country or region supports these frequency bands. |
Data rate set | The following 802.11-compliant data rates in Mbps are supported: 2.4 GHz radio
802.11b: 1, 2, 5.5, 11
802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54
802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)
802.11ax: 8.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40) 5 GHz radio
802.11a: 6, 9, 12, 18, 24, 36, 48, 54
802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)
802.11ac: 6.5 to 1,732 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT160)
802.11ax: 8.6 to 2,402 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE160) |
FEM | iFEM |
channel width | 5 GHz channel width Auto/20/40/80/160 MHz
2.4 GHz channel width Auto/20/40 MHz |
Maximum wireless data rate | 3570 Mbps |
5 GHz wireless data rate | 2882 Mbps |
2.4 GHz wireless data rate | 688 Mbps |
Coverage range | 55 sq.M (592.02 square ft.)
Note: The data is obtained in an ideal environment without obstruction. The signal coverage radius depends on client performance and environmental interference. |
Antenna type | 5 GHz: 1 built-in omnidirectional antenna Integrated 2.4 GHz and 5 GHz: 2 built-in omnidirectional antennas |
Max. antenna gain | 2.4 GHz radio: 4.56 dBi
5 GHz radio: 2.84 dBi |
Port Specifications |
Number of 10/100/1000BASE-T ports | 4 |
Number of 10/100/1000/2500BASE-T ports | 1 |
Status LED | 1 x multi-color system status LED |
Button | 1 x Reset button
Press the button for shorter than 2 seconds. Then the device restarts.
Press the button for longer than 5 seconds. Then the device restores to factory settings. |
Power Supply and Consumption |
Power supply | PoE/PoE+ |
PoE In standard | IEEE 802.3af (PoE) Note: The standard does not support PoE Out.
IEEE 802.3at (PoE+) |
Maximum power consumption | 15 W (excluding PoE output) |
Number of PoE Out ports | 1, PoE budget 10W |
WLAN |
Max. number of associated STAs | 64 (2.4 GHz)
511 (5 GHz)
511 (2.4 GHz and 5 GHz enabled) |
STA management | SSID hiding
Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently.
Remote intelligent perception technology (RIPT)
Intelligent load balancing based on the STA quantity or traffic |
STA limiting | SSID-based STA limiting
Radio-based STA limiting |
Bandwidth limiting | STA/SSID/AP-based rate limiting |
Wireless roaming | Layer 2 and Layer 3 roaming |
Authentication and encryption | Remote Authentication Dial-In User Service (RADIUS)
PSK, web, 802.1x, WPA, WPA2, and WPA3 authentication
WPA3-Personal (SAE) and WPA3-Personal hybrid
QR code-based guest authentication
SMS authentication
MAB authentication
Data encryption: WPA-TKIP, WPA-PSK, WPA2-AES, WEP (64/128-bit) |
Data frame filtering | Allowlist, static blocklist, and dynamic blocklist |
WIDS | WIDS
User isolation
Rogue AP detection and containment |
ACL | Dynamic ACL assignment
ACL assignment based on time spans
ACL assignment (complete entry) based on MAC addresses
Execution of pre-configured ACLs (entry index) based on MAC addresses |
CPP | Supported |
NFPP | Supported |
Management |
Network management | NTP server and NTP client
SNTP client
SNMP v1/v2c/v3
Fault inspection and alarm
Information statistics and logging |
Network management platform | Web-based management (Eweb) |
STA access management | Console and Telnet-based management
FTP client and TFTP client |
Fat/Fit/Cloud mode switchover | When the AP works in Fit mode, it can be switched to Fat mode through an AC.
When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet.
When the AP works in Cloud mode, it can be managed through Ruijie Cloud. |
Routing and Switching | RG-AP180P-L |
IP service | Static IPv4 address and DHCP-assigned IPv4 address |
Multicast | Multicast-to-unicast conversion |
IPv6 basics | IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 Ping
IPv6 DHCP Client |
IP routing | IPv4/IPv6 static routing |
VPN | PPPoE client
IPsec VPN |
Dimensions and Weight |
Unit dimensions (W x H x D) | 86 mm x 24 mm x 124 mm (3.39 in. x 0.94 in. x 4.88 in.) (excluding the mounting bracket) |
Unit weight | ≤ 0.27 kg (0.60 lbs.) (without packaging materials) |
Environment and Reliability |
Operating temperature | Operating temperature: 0°C to 40°C (–32°F to +104°F) |
Humidity | Operating humidity: 5% to 95% RH (non-condensing)
Storage humidity: 5% to 95% RH (non-condensing) |
ประกัน | 3 ปี |
